Verti-Mix
The right Verti-Mix - For your needs...
- Usable mixing capacity of 7,5-16,5 m³
- Expandable by 180 mm or 360 mm attachments
- Highest stability of the container due to patented embossing
- All components have been designed for maximum mixing capacity
The IMS mixing auger – Variability and strength for any purpose
Due to the patented knife adjustment system, the IMS mixing auger can be perfectly adapted to your specific conditions of use. The robust and low-maintenance angular gear ensures a long service life even under challenging conditions.
- Low power requirement
- Optimum fodder structure
- Homogeneous mixing
- Energy-saving short mixing times
You want your business to grow – Your Verti-Mix adapts to your growing needs
The patented container embossing at the top container edge provides the Strautmann mixing container additional strength and stability. It serves as the basis for variable container extensions (0 mm - 180 mm - 360 mm) enabling you to adapt the capacity of the mixing container to your operational requirements.
- Flexible customised extension of the capacity
- Highest stability of the container due to embossing
- Design of all components for maximum possible container capacity
Operating and weighing - Take your choice
Strautmann responds to individual customer demands also with regard to the kind of operating device. The selection of the operating option depends on the user‘s requirements.
Technical Data
Type | Verti-Mix 951 (7,5 / 8,5 / 9,5 [m³]) | Verti-Mix 1251 (10,0 / 11,0 / 12,5 [m³]) | Verti-Mix 1401 (12,0 [m³]) | Verti-Mix 1651 (13,5 / 15,0 / 16,5 [m³]) | |
---|---|---|---|---|---|
Dimensions | |||||
Length | m |
4,65 |
4,87 | 5,10 | 5,10 |
Width with crossover conveyor | m | 2,16 | 2,28 | 2,42 | 2,42 |
Width with one-sided discharge | m | 2,26 | 2,38 | 2,52 | 2,52 |
Width with two-sided discharge |
m |
2,36 | 2,48 | 2,62 | 2,62 |
Outside wheel width | m | 1,78 | 2,04 | 2,23 | 2,23 |
Extension height | m | - / 0,18 / 0,36 | - / 0,18 / 0,36 | - / 0,18 / 0,36 | - / 0,18 / 0,36 |
Length with front crossover conveyor | m | 5,30 | 5,50 | 5,75 | 5,75 |
Length with rear crossover conveyor | m | 4,90 | 5,04 | 5,17 | 5,17 |
Discharge height, crossover conveyor |
m | 0,74 | 0,76 | 0,76 | 0,76 |
Distance Centre of drawbar lug - Centre of axle | m | 3,38 | 3,47 | 3,72 | 3,72 |
Distance Centre of drawbar lug - centre of axle with front crossover conveyor | m | 4,10 | 4,19 | 4,29 | 4,29 |
Dead weight with crossover conveyor | kg | 3.200 / 3.260 / 3.300 | 3.800 / 3.860 / 4.150 | 4.840 / 4.900 / 4.960 | 4.840 / 4.900 / 5.000 |
Gross vehicle weight rating | |||||
Admissible tongue load | kg | 1.000 | 1.200 | 1.400 | 1.400 |
Technically admissible gross vehicle weight rating 15 km/h, single axle | kg | 7.000 | 12.000 | 12.200 | 12.200 |
Gross vehicle weight rating 25 km/h (StVZO), single axle |
kg | 7.000 | 9.000 | 11.400 | 11.400 |
Power required | |||||
without switchgear 23 rpm | HP | - | - | - | 73 / 80 / 88 |
with switchgear 12.8/23 rpm | HP | - | - | - | 45 / 49 / 54 |
with switchgear 28,8/13,8 rpm | HP | - | - | - | 47 / 51 / 56 |
without switchgear 26 rpm | HP | 35 / 39 / 42 | 50 / 53 / 56 | 64 / 69 / 74 | - |
with switchgear 26/14,4 rpm | HP | 25 / 28 / 30 | 35 / 38 / 41 | 40 / 43 / 46 | - |
with switchgear 32,5/15,7 rpm | HP | 27 / 30 / 32 | 37 / 40 / 43 | 42 / 45 / 48 | - |
without switchgear 30 rpm | HP | 44 / 47 / 51 | 67 / 70 / 73 | 76 / 82 / 88 | 88 / 96 / 105 |
with switchgear 30/16,7 rpm | HP | 32 / 34 / 37 | 47 / 50 / 53 | 54 / 58 / 62 | 62 / 69 / 73 |
with switchgear 37,5/18,1 rpm | HP | 34 / 36 / 39 | 49 / 52 / 55 | 56 / 60 / 64 | 64 / 71 / 75 |
Axle - track width | mm | 1.510 | 1.630 | 1.740 | 1.740 |
Container | |||||
Container wall thickness | mm | 8 | 8 | 8 | 8 |
Bottom plate | mm | 18 | 20 | 20 | 20 |
Container length inner dimension incl. overflow ring | m | 2,63 | 2,93 | 3,27 | 3,27 |
Vehicle height depending on tyres with single axle | |||||
30 x 11.5 - 14,5 | m | 2,30 / 2,48 / 2,66 | 2,59 / 2,77 / 2,95 | - | - |
250-15 18 (18 PR) | m | 2,32 / 2,50 / 2,62 |
2,61 / 2,79 (Ablastung 8.500 kg) |
- | - |
10.0/75-15.3 (18 PR) | m | 2,31 / 2,49 / 2,67 | - | - | - |
400/60-15,5 (14 PR) | m | 2,43 / 2,61 / 2,79 | - |
- |
- |
400/60-15,5 (18 PR) | m | - | 2,72 / 2,90 / 3,08 |
2,89 / 3,07 / 3,25 (Ablastung 9.660 kg) |
3,05 / - / - (Ablastung 9.660 kg) |
19.0/45-17 | m | - | 2,72 / 2,90 / - Ablastung 8.500 kg) | - | - |
215/75R17.5 (133) double | m | - | - | 2,80 / 2,98 / 3,16 | 2,97 / 3,15 / 3,33 |
435/50 R 19.5 | m | - | 2,80 / 2,98 / 3,16 |
2,97 / 3,15 / 3,33 |
3,14 / 3,32 / ,50 |
8.15-15 (14 PR) double | m | - | 2,58 / 2,76 / 2,94 | 2,76 / 2,94 / 3,12 | 2,94 / 3,12 / 3,30 |
Downloads
- PDF4.8 MB